Electric Juggernaut LE – a true e-ATV


Rungu Electric Juggernaut LE

True e-ATV

Electric Juggernaut LE is a true e-ATV. With a 5.4 Hp torque-oriented power plant and total weight only 98 lbs (44 kg) Rungu Electric Juggernaut LE has the same power-to-weight ratio as a utility-oriented ATV.  The LE e-ATV is designed for off-road use, and can carry a combined load of 375 lbs (170 kg).  Climbs gradients greater than 30% and reaches speeds of 35 mph (56 kph).

“…this trike provides for serious off-road flotation in sand, mud, and snow. Plus, it can haul up to 200 pounds of cargo through that rough terrain with the stability of an ATV.” – Popular Mechanics
Buy Now!

Electric Juggernaut LE with all accessories and upgrades

Engineered design

Electric Juggernaut LE is easy to learn and easy to ride.  Features our patented Rungu steering design and the stability of three wheels to maintain control in soft sand, snow and mud.  Even when pulling a trailer!  On harder surfaces, bank the LE into turns – unlike a quad!  People who haven’t ridden a two-wheeler in more than fifteen years can learn to ride Rungu in less than 30 minutes.

Features and Performance

  • NEW Silent, throttle-controlled, high-torque, three-phase hub motor designed for off-road use 
  • Up to 4,000 Watts of power for steeper inclines and faster flat sections
  • An easy-to-replace battery pack that can extend the 20+ mile (32 km) standard range per charge
  • 180 mm Hydraulic Disc brakes on all three wheels for optimal stopping power
  • Off-road can achieve 35 mph (56kph) 
  • High quality off-road fat tires
  • Optional Front Suspension and suspension seatpost
  • Colors: Military Green or Midnight Black
 “The Juggernaut’s motor is COMPLETELY quiet which can give you stealthy access through all terrains. ” – Perry Yee, Navy Seal

Buy Now!

Component Specifications

 

Battery and controller system All-weather powder coat gloss-black aluminum housing with removable battery box 15 AH 74V LiNMC battery and controller
Crankset and bottom bracket Zephyr 2 pc crank and sealed bottom bracket
Display Grin technologies – Cycle-anaylyst – digital readout of speed, power output, charge status v 2.4
Forks Hi-Carbon Steel with disc brake mount / Optional Suspension fork – alloy 60 mm travel (as shown above)
Frame 6061-T6 Aluminum – Fat tire off-set geometry with clearance for 4.8″ tires, M6 fastener points on rear triangle, M8 under carriage mount points, front through-hole mounts for overhead carrier.  Rugged powder coat finish in Military Green or Midnight Black (as shown above)
Front Hubs Alloy with quick release and sealed bearings
Key switch Key removable in off-position, retained in on-position (2 keys included)
Rear derailleur and shifter Shimano with trigger shifting – 6 speeds
Rear Hub motor and controller Hi Power Cycles – 2017 Stryker 4kW three phase
Saddle and seatpost Velo Plush with 31.6 mm alloy seat post – quick release seat post binder (Optional comfort package with suspension seat post)
Steering Proprietary linkage and stem design, sealed bearing headsets, throttle compatible grips
Tires 26″x 4.8″ for sand and snow
Wheels 26″ x 82 mm Alloy front, 26″ x 102 mm rear – drilled for weight reduction, stainless steel spokes for corrosion resistance
Brakes Front: Tektro dual 180 mm hydraulic with parking brake; Rear: Tektro 180 mm hydraulic with parking brake

*Component specifications subject to change without notice

Dimensions

 

 

Electrical Case clearance height 8.75″ (222 mm)
Handle bar width (effective) 33″ (830 mm)
Handle bar minimum height 40″ (1016 mm)
Stand over height 26″ (660 mm)
Rider height supported 5′ (152mm) to 6′ 2″ (188 mm)
Weight 98 lbs. (44 kg)
Weight (shipping) 130 lbs. (60 kg)
Wheel base length 4’7″ (1390 mm)
Projected length 7′ (2135 mm)

Click here to order the Rungu Electric Juggernaut LE online (International orders, please contact Rungu directly)